We are more than excited to officially launch our 10th color, I Like You Blue! We originally created this custom color for one of our founder's, Maui Screen Printing. They are a fun group of screen printers who spread positivity in everything they do.

Technical Information:

PMS: NO MATCH

RGB: R:166 G:187 B:200

Weight: Approx 4.2 Ounce

Polyester Dye: None

Natural Fiber Dye: GOTS Certified Light Blue

Dischargeability: A- due to the lighter color of the garment.

Dye Migration: None

Print TDS

Screen Mesh: 156-230 mesh for a nice soft and pliable ink deposit. If possible, use thin thread mesh for more control over your print deposit.

Ink Type: While all ink types can be used, Water Base inks are preferable since they have a super soft finish and drape with the fabric when worn.

Flash: Flash long enough to evaporate the water in WB inks. You should not need to exceed 220 degrees and 10 seconds. Ink should be dry to the touch. Plastisol should be around 180-220 degrees for under 6 seconds depending on the ink used. Ink should be tack free and not dry to the touch.

Curing: Follow manufacturers cure recommendations. There are many different inks with different cure temps on the market. These temps range from 250-320 degrees. Do not exceed 350 degrees on the garment and do not exceed more than 3 min 30 seconds cure time within your dryer.

For optimal soft hand printing: Incorporate a smoothing screen, an Iron, or a tool like the Stampinator to smooth out your prints and help create a thinner and more pliable print.

Wear and Wash Instructions

For best results, hand wash or machine wash inside out on gentle cycle and hang dry or dry on low. Do not bleach.